Työkalu Cyclus Tools Snap.In for bottom bracket FSA MegaEVO/Token Ninja (7202711)
Tuotemerkki: Cyclus Tools
Työkalu Cyclus Tools for tapping & facing bottom brackets shells T47 (720151)
Kuvaus - Työkalu Cyclus Tools for tapping & facing bottom brackets shells T47 (720151)
Cyclus Tools develops and produces top quality tools for professional bicycle repair shops, but of course its also appropriated for hobby technicians. Produced in Europe, these durable tools are permanently proofed by our quality checks. With furnitures for your workshop or cosmetic care products the portfolio is rounded off very well. For every problem Cyclus Tools offers solutions. Cyclus Tools counts among the leading manufacturers of tools for bicycles. To stay at the top we continuously enhance our products for todays fast changing conditions.
Product technical specifications
- The Cyclus Tools Cutting and milling tool for T47 thread is a professional tool specifically designed for recutting work on the bottom bracket thread and for milling work on the bottom bracket shell. After you have recut the thread, the cutting tool is disengaged and the face milling tool is used. You don't need to re-clamp the tool, ensuring 100% face milling of the bottom bracket shell treads.
Benefits:
You only need one tool for both work steps.
the change of the tool is eliminated
the guide results in exactly parallel milled housing sides. T47. It combines the advantages of BSA and large-volume bottom bracket shells with a diameter of 46 mm, e.g. PressFit 30, BBRIGHT PressFit, 386EVO, OSBB. By means of this cutter, the existing housings can be provided with a flat milled surface. Thus, analogous to BSA, bearing shells can be professionally screwed as usual.
The proper function of the cutter can only be guaranteed with metal. Furthermore, not every frame is suitable for this type of conversion. Please ask the respective manufacturer of the frame.
The proper function of the cutters can only be guaranteed with metal. Special attention must be paid to glued-in/laminated metal sleeves when cutting the thread, as these are exposed to high torsional forces. Furthermore, not every frame is suitable for this type of conversion. Please ask the respective manufacturer of the frame.
Please note: Letters or marks applied to the tool always refer to the tool itself. I.e. if an "R" is applied to one side, then this is a classic thread with the direction of rotation to the right clockwise. If an "L" is applied, the direction of rotation is to the left counterclockwise. It is not meant the application side with the bicycle, because there is no fixed reference system here!
Tuotteen tiedot
- Tuotteen nimi
- Työkalu Cyclus Tools for tapping & facing bottom brackets shells T47 (720151)
- Tuotekoodi
- TOOL467
- Valmistajat
- Cyclus Tools
- Viivakoodi
Viimeksi katsotut
